| Availability: | |
|---|---|
| Quantity: | |
A panel-mount USB-C extension cable brings a device’s internal USB-C port to the outside of an enclosure. This 0.3 m King Lai Electronics assembly has screw-mount holes on both the male and female connectors, supports USB 3.1 Gen 2 at 10Gbps and 3A PD 3.0 / QC 3.0 charging, and uses 16+1 oxygen-free copper conductors with gold-plated contacts.
Item | Specification |
Product | USB 3.1 Type-C male to female, screw-hole fixable extension, 16 cores |
Length | 0.3 m |
Connector 1 | USB 3.1 Gen 2 Type-C male, dual screw holes, reversible |
Connector 2 | USB 3.1 Gen 2 Type-C female, dual screw holes, reversible |
Data rate | USB 3.1 Gen 2 (SuperSpeed+), 10Gbps |
Conductor / shield | Gold-plated contacts, 16+1 pure-copper cores, braided shield, OD 4.5 mm |
Charging | 3A fast charging; PD 3.0 / QC 3.0 compatible |
Compatibility | USB 3.1 Type-C / USB 3.1 / 3.0 / 2.0 |
Housing | Aluminum alloy with PVC overmold; ≥10,000 insertion cycles |
Jacket | Flame-retardant (UL-rated) outer jacket |
Environmental | RoHS |
Feature: dual screw-mount holes on the male and the female end.
Advantage: the female end fixes to a panel cut-out while the male end locks into the host’s threaded port. Benefit: a user-facing USB-C port on the front of an industrial PC, rack chassis or kiosk that cannot be pulled out of alignment.
Feature: compact 30 cm run.
Advantage: minimal signal loss inside the enclosure and no excess cable to route.
Benefit: full 10Gbps and 3A performance at the external port, with a tidy internal layout.
Feature: SuperSpeed+ with foil and cross-woven braid shielding.
Advantage: twice the rate of USB 3.0 and clean signalling next to power supplies.
Benefit: the external port behaves exactly like the internal one.
Feature: corrosion-resistant plating and one-piece aluminum/PVC shell.
Advantage: ≥10,000 insertions without contact wear and a strain-relief that does not crack.
Benefit: suitable for publicly accessed ports that are plugged daily.
Feature: 3A power path.
Advantage: the panel port charges handhelds and powers USB-C peripherals.
Benefit: one panel cut-out serves both data and power.
• Front-panel USB-C ports on industrial PCs, servers and rack enclosures
• Machine control panels and test fixtures
• Kiosks, POS terminals and lab instruments
• Monitor and docking-station port extension
King Lai Electronics Co., Ltd. manufactures panel-mount USB-C extensions in Taiwan from drawing to SOP mass production under ISO 9001:2015, with UL- and IPC-referenced workmanship and an SGS low-lead/low-cadmium (RoHS) process. Screw spacing, flange style, length, jacket color and overmold marking can be matched to your panel design.
It is a short male-to-female USB-C cable whose female connector has screw holes so it can be bolted into a panel cut-out, giving equipment an external USB-C port connected to an internal host port. The male end here also has screw holes for a locked internal connection.
Yes. The cable supports 3A charging compatible with PD 3.0 and QC 3.0, so the external port can charge handhelds and power USB-C accessories as well as transfer data.
For most panel-mount installations, yes — the port sits close to the panel, and the short run keeps signal attenuation minimal for 10Gbps operation. King Lai Electronics can supply other lengths to order.
Yes. The cable is backward compatible with USB 3.1, USB 3.0 and USB 2.0 devices; speed follows the slower side of the connection.
Designing an enclosure with an external USB-C port? → [Get a Quote] with your panel thickness and cut-out drawing. |